| MD |
Measured depth along the hole from the depth datum |
| TVD |
True vertical depth below the datum |
| TVDSS |
True vertical depth below sea level (TVD minus datum elevation) |
| KB, RT, DF, GL |
Depth datums: kelly bushing, rotary table, drill floor, ground level |
| DLS |
Dogleg severity: change of hole direction per 100 ft or 30 m |
| VS |
Vertical section: horizontal departure projected on an azimuth |
| WBE |
Well barrier element (casing, cement, packer, safety valve...) |
| Primary / secondary barrier |
The first and second envelope preventing flow from the reservoir to the surroundings |
| MAWOP |
Maximum allowable wellhead operating pressure of an annulus |
| MAASP |
Maximum allowable annulus surface pressure |
| CBL / VDL |
Cement bond log amplitude / variable density log waveforms |
| BI |
Bond index, from CBL amplitude and calibration |
| GOC, OWC, GWC, FWL |
Gas-oil, oil-water, gas-water contact; free water level |
| GDT, ODT, OUT, WUT |
Gas / oil down to, oil / water up to (limits, not contacts) |
| Wh, Bh, Ch |
Mud-gas wetness, balance and character ratios |
| LAS |
Log ASCII Standard (CWLS) |
| WITSML |
Wellsite information transfer standard markup language (Energistics) |
| PPDM |
Professional Petroleum Data Management association data model |
| Environment |
The configuration file adapting the software to a customer, country or asset |
| Vocabulary |
A mapping from your data's codes to standard codes |
| Lexicon |
A mapping from local layer names to canonical stratigraphic units |
| Mapping profile |
A description of which tables and columns of a source hold which well data |