Validation messages
The software checks data before drawing it. Errors mean a result cannot be trusted (for example a casing larger than its hole); warnings point at likely data problems (a survey dogleg above your threshold, a top picked twice); info messages are notes (an estimated value). Thresholds come from your environment.
| Code prefix | Area |
|---|---|
| WV | Document, survey and depth reference |
| WL | Logs and log tracks |
| WS | Schematic |
| WB | Well barriers and leak paths |
| WA | Annuli and MAASP |
CV - Configuration verification (wellbore-config verify)
| Code | Severity | Message (… = filled in) |
|---|---|---|
CV001 | Error | leak-path network '…': … refers to unknown cavity '…' leak-path network '…': link … has unknown envelope '…' |
CV002 | Error | leak-path network '…': based on unknown network '…' leak-path selection '…' chooses unknown network '…' |
CV003 | Error | invalid well identifier pattern: … |
CV004 | Info | abandonment rule set '…' has no value for … |
CV005 | Warning | model catalog: … '…' is defined … times (the first is used) |
CV006 | Warning | symbol role '…': component type '…' is not in the model catalog |
CV101 | Error | based on unknown template '…' |
CV102 | Error | binding '…' uses unknown symbol role '…' |
CV103 | Error | binding '…': kind must be string or equipment, not '…' binding '…': pick must be first, deepest or deepestBottom, not '…' |
CV104 | Error | requires unknown binding '…' |
CV105 | Error | unknown envelope '…' unknown plug envelope '…' |
CV106 | Error | …: element type is not in the model catalog |
CV107 | Error | …: target '…' is not a binding |
CV108 | Error | … …: … … when: … |
CV109 | Error | …: unknown target kind '…' |
CV110 | Warning | symbol role '…': symbol '…' is not in the symbol catalog |
WV - Document, survey and depth reference
| Code | Severity | Message (… = filled in) |
|---|---|---|
WV001 | Error | Depth axis bottom (…) must be greater than top (…). |
WV002 | Error | Axis is … but the document has no survey (depths cannot be converted). |
WV003 | Warning | The view has no tracks. |
WV004 | Error | Duplicate track id '…'. |
WV005 | Warning | Track '…' is of type '…', whose family is not loaded (kept, not drawn). |
WV006 | Error | Track '…' has a non-positive width ratio. |
WV007 | Info | No depth track: depth labels will not be shown. |
WV008 | Info | Top '…' at … is outside the depth axis. |
WV009 | Error | Track '…' validation failed: … |
WV010 | Error | Survey MD must increase: station … (…) after …. |
WV011 | Error | Survey station at …: inclination … outside 0-180. |
WV012 | Warning | Survey station at …: azimuth … outside 0-360. |
WV013 | Warning | Dogleg severity … deg/… at … … exceeds … (survey or well path check). |
WV020 | Error | Interval '…' has bottom <= top. |
WV021 | Warning | Interval '…': unknown lithology '…'. |
WV022 | Warning | Intervals '…' and '…' overlap. |
WV030 | Warning | Trajectory track '…' has no survey to show. |
WV040 | Warning | …: referenced schematic track '…' is not in the view. |
WV041 | Warning | …: the view has no schematic track to read. |
WV050 | Warning | Top '…' is picked at … different depths. |
WV051 | Warning | Contact '…' has unknown type '…'. |
WV052 | Error | … (…) is below … (…): gas must sit above oil, oil above water. |
WV060 | Warning | Wells use different coordinate systems ( |
WV061 | Info | No coordinate system for …; others use …. |
WV062 | Info | No magnetic reference for the survey (no field in the header and no well location): position uncertainty uses the simple model. |
WV063 | Info | Magnetic field computed for an assumed date: …. |
WV064 | Warning | Survey tool '…' (from md …) is not one of the environment's tool models - … is used instead. |
WI - Well identifiers (national formats)
| Code | Severity | Message (… = filled in) |
|---|---|---|
WI001 | Warning | well '…': identifier … matches none of the expected formats: |
WI002 | Error | well identifier format '…': invalid pattern (…) |
WL - Logs and log tracks
| Code | Severity | Message (… = filled in) |
|---|---|---|
WL001 | Error | … scale minimum equals maximum (…). |
WL002 | Error | … log scale needs positive limits (min …, max …). |
WL003 | Warning | … has no samples. |
WL004 | Info | … samples are not in depth order (sorted automatically for drawing). |
WL005 | Warning | … has … duplicate depth(s). |
WL006 | Warning | … contains … null value(s) (… / NaN) — they should be removed on import. |
WL007 | Info | … data (…-…) lies outside the depth axis. |
WL008 | Info | … has … data gap(s) larger than …x the sample step. |
WL009 | Warning | …: …% of values are outside the scale …-… (rescale or enable a backup scale). |
WL010 | Warning | lithology intervals overlap at …. |
WL011 | Error | … fills between curves but companion '…' is not in this track. |
WL012 | Warning | … uses cutoff shading without a cutoff value (FillReference). |
WL013 | Warning | … fill style '…' is not in the lithology library (default fill used). lithology '…' is not in the lithology library. |
WL020 | Error | …: flag interval at … has bottom <= top. |
WL021 | Warning | …: flag intervals overlap at …. |
WL022 | Info | …: code(s) … have no style and are not drawn. |
WL030 | Warning | …: fewer than two valid tests — no gradients. |
WL031 | Warning | …: … gradient fit RMS residual … exceeds … (mixed fluids or bad tests?). |
WL032 | Info | …: … gradient from only … tests. |
WL033 | Info | …: test at … is outside the depth axis. |
WL040 | Error | …: zero or negative values on a log scale cannot be plotted. |
WL041 | Warning | …: …% of points are outside the scale (not drawn). |
WL042 | Info | …: scale …-… matches none of the curves in this track (points are not directly comparable). |
WL050 | Error | …: dip … at … outside 0-90°. |
WL051 | Warning | …: azimuth … at … outside 0-360°. |
WL052 | Info | …: no dips. |
WL060 | Info | …: no waveforms. |
WL061 | Error | …: … depths for … traces. |
WL062 | Error | …: traces have different sample counts. |
WL063 | Error | …: time step must be positive. |
WL070 | Warning | …: sample …-… totals …% (expected ~100%). |
WL071 | Warning | …: unknown lithology '…' at …. |
WL072 | Warning | …: cuttings samples overlap at …. |
WL073 | Error | …: cuttings sample at … has bottom <= top. |
WL080 | Error | …: image rows have different azimuth sample counts. …: … depths for … rows. |
WL081 | Error | …: image depths must increase. |
WL082 | Warning | …: sinusoid picks need the borehole diameter. |
WL083 | Info | …: no image data. |
WS - Schematic
| Code | Severity | Message (… = filled in) |
|---|---|---|
WS001 | Error | Depth axis bottom must be greater than top. |
WS002 | Error | Duplicate id '…'. |
WS010 | Error | String '…' uses unknown symbol '…'. |
WS011 | Error | String '…' uses equipment symbol '…'. |
WS012 | Error | String '…' has bottom <= top. |
WS013 | Warning | Cement interval of '…' is outside the string or empty. |
WS014 | Warning | String '…' extends beyond the depth axis. |
WS020 | Warning | Formation '…' uses unknown lithology '…'. |
WS021 | Warning | Formation '…' has bottom <= top. |
WS030 | Error | Equipment '…' uses unknown symbol '…'. |
WS031 | Error | Equipment '…' uses string asset '…'. |
WS032 | Warning | Equipment '…' is outside the depth axis. |
WS033 | Info | '…' is not a surface symbol but is placed in the surface stack. |
WS034 | Error | Equipment '…' breaks unknown string '…'. |
WS035 | Error | Equipment '…' sections unknown string '…'. |
WS040 | Warning | No host string (slot r=…) at … for '…' (…). No string to section (slot …) at … for '…' (…). |
WS041 | Info | '…' and '…' overlap on the same string at this scale (…, …). |
WS050 | Error | String '…': hole …in is not larger than its OD …in. |
WS051 | Info | String '…' has no hole size (estimated for drawing). |
WS060 | Warning | …: no survey — the well path cannot be drawn. |
WS061 | Warning | …: no schematic track to draw along the path. |
WS070 | Error | Symbol id '…' is used … times. |
WS071 | Error | Symbol '…' has unknown kind '…' (expected …). |
WS072 | Warning | Symbol '…' uses layer '…', which is not in the layer order. |
WS073 | Error | Symbol '…' has no drawing primitives. |
WS074 | Error | Symbol '…': body …-… must lie inside its viewBox (0-…). |
WS075 | Warning | Symbol '…' has no name. |
WS080 | Info | String '…': outside diameter … in is not a standard … size of … (nearest … in). String '…' outside diameter … in is not a standard … size of … (nearest … in). |
WS081 | Info | String '…': grade '…' is not in the tubular catalogue (…). String '…' grade '…' is not in the tubular catalogue (…). |
WS082 | Info | String '…': connection '…' is not in the tubular catalogue (…). String '…' connection '…' is not in the tubular catalogue (…). |
WB - Well barriers and leak paths
| Code | Severity | Message (… = filled in) |
|---|---|---|
WB001 | Warning | No … well barrier defined (two independent barriers expected). |
WB002 | Warning | Common WBE in primary and secondary barriers: …. Risk assessment and risk-reducing measures required. |
WB003 | Error | … has FAILED — … barrier not intact. |
WB004 | Warning | … is impaired. |
WB005 | Info | … has no verification date. |
WB006 | Error | … does not reference a component or string. … references unknown item '…'. |
WB007 | Warning | …: casing / cement WBEs should be labelled with size and depth. |
WB008 | Error | … needs a depth interval. |
WB020 | Warning | …: no barrier data to analyse. |
WB021 | Error | …: weakest leak path has … barrier(s), … required (…). |
WB022 | Warning | …: link '…' references unknown barrier element '…'. |
WB023 | Warning | …: the weakest leak path counts unverified elements. |
WB030 | Warning | Annotation '…' refers to a track that is no longer in the view. |
WB031 | Info | Annotation '…' at … lies outside the depth axis. |
WE - Equipment attributes
| Code | Severity | Message (… = filled in) |
|---|---|---|
WE001 | Warning | …: … is required. |
WE002 | Error | …: … '…' is not a number. …: … '…' is not a date (yyyy-MM-dd). …: … '…' is not a value with a unit. |
WE003 | Warning | …: … is in '…', which cannot be converted to …. |
WE004 | Warning | …: … …… is outside … to …. |
WE005 | Warning | …: … '…' is not one of: …. |
WA - Annuli and MAASP
| Code | Severity | Message (… = filled in) |
|---|---|---|
WA001 | Error | Annulus … references unknown strings. |
WA002 | Error | Annulus … pressure … is ABOVE MAASP …. |
WA003 | Warning | Annulus … pressure … is above MAWOP …. |
WA004 | Info | Annulus … has no pressure readings. |
WA005 | Info | Annulus … has no MAASP defined. |
WA006 | Warning | Annulus …: MAWOP … exceeds MAASP …. |
WA007 | Warning | Annulus …: MAASP … exceeds the screening estimate … (…: …) — review. |
WR - Configuration resource files (lexicons, vocabularies, labels)
| Code | Severity | Message (… = filled in) |
|---|---|---|
WR001 | Error | a unit has no id (name '…'). |
WR002 | Warning | unit '…' has no name. |
WR003 | Error | unit id '…' is used … times. |
WR004 | Warning | '…' is claimed by units '…' and '…'; it resolves to '…'. |
WR005 | Warning | unit '…': colour '…' is not #rrggbb. |
WR010 | Warning | unknown domain '…' (known: …). |
WR011 | Error | domain '…': '…' maps to '…', which is not a valid canonical value. |
WR012 | Warning | domain '…': code '…' is listed … times (codes are case-insensitive; the last one wins). |
WR013 | Warning | vocabulary has no 'domains' object. |
WR020 | Warning | label '…' is empty (the built-in text is replaced by nothing). |
WP - Permanent plug and abandonment
| Code | Severity | Message (… = filled in) |
|---|---|---|
WP001 | Error | No cement plug in the schematic - no permanent barrier. |
WP002 | Error | No cement plug above the uppermost source of inflow at …. |
WP003 | Error | Plug '…' is … long; … required……. |
WP004 | Error | Plug '…': casing cement behind '…' does not cover … - … (cross-section not sealed). |
WP005 | Warning | Only … plug(s) above the sources of inflow - a secondary barrier is expected. |
WP006 | Warning | No environmental plug with its top shallower than ………. |
WP007 | Warning | Cement plug '…' is … - verify it (tag and pressure test). |
WP008 | Warning | Rule set '…' (…) has no value for …: the checks that need them are skipped - fill them in (abandonment.ruleSets). |
WP009 | Info | Rule set '…' measures the environmental plug from the ground / mudline, but the schematic's surface depth is unknown (datum GL / SB / ML): measured from the depth zero. |